Intelligent high speed cutting for single layer material

Table-the main body of the machine

The BK3 table is composed of a complete aviation aluminum cutting table. The aviation material enables BK3 to work for high-intensity production activities, so that it can continuously cut, convey and collect.

The cutting of ultra-long samples can save labor and improve efficiency in an all-round way, making factory production possible 24/7.At the same time, the density of aviation aluminum material is higher, and the surface of the material is smoother and harder than ordinary aluminum material. This makes the working table surface more stable, and there is no need to worry about the inclination of the table surface and the cutting is not accurate enough, which gives the BK3 this machine super stability.

The table surface works with the air pump to realize the vacuum regional suction function. If the material to be processed is smaller than the machine cutting width, you can turn on and off the suction of a certain table separately to form an independent working area, and control the vacuum power through the frequency conversion system, so as to realize the area suction to generate greater suction and smaller power loss.

System-neural network of machine

The moving beam on the table controls the entire cutting process, just like a human arm, and complements the motion control system independently developed by IECHO, which makes the cutting process smoother. Equipped with up to three cutting modules. The cutting modules have various types and functions. With different types of blades, they can meet the various needs of different materials for cutting processes in different industries.

It is equipped with IECHO automatic camera positioning system, which is the eye of the cutting machine. It uses high-definition CCD camera to realize automatic and precise positioning of various materials, automatic cutting, and solve the problems of inaccurate manual positioning and printing deformation.

BK3 is equipped with an automatic knife initialization(AKI) system, accurately control the depth of the tool through the electronic induction AKI system.User only need to use computer control, click the automatic knife initialization button, and the machine can automatically adjust to the most suitable cutting depth according to the thickness and material of the material.

Next to the tool setting system, which is on the side of the cutting machine, is the BK3 transmission system. This system is very efficient and cost-effective. It uses belt transmission, which has the characteristics of large carrying capacity, high transmission accuracy, high speed and short distance transmission, and low noise.

The power of the machine

BK3 is an upgraded version of BK2. As a high-speed digital cutting system, its cutting speed can reach 1500mm/s, which makes the BK3 series cutting machine more efficient. And the cutting accuracy can be accurate to 0.1mm, the maximum cutting thickness is 50mm, and it can work stably in an environment of up to 40℃.